Hоttеѕt Sаlеѕ AEMC 8220 1-Phase Power Quality Analyzer with 5A/100A Current Probe
Review AEMC 8220 1-Phase Power Quality Analyzer with 5A/100A Current Probe
So you can check out the other reviews Frее Shірріng 🛒 AEMC 8220 1-Phase Power Quality Analyzer with 5A/100A Current Probe at Amazon.com
only with $1,147.52
| Brand | AEMC |
| Power Source | 1.5v Nimh Battery |
| Item Weight | 4.5 Pounds |
| Measurement Type | Multimeter |
- Single-phase digital multimeter measures voltage, current, power, harmonics, temperature, and rotation for use in energy monitoring, motor start-up analysis, hot-spot detection, and power-system analysis
- True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform
- Measurements include kW, kVAR, PF, DPF, kWh, KVARh, kVAh, VA, phase rotation, temperature, rpm, resistance, continuity, and diode check
- Stores up to nine complete sets of readings for all volt, amp, power, harmonics and other measurements
- Meets IEC safety standard 61010-1 and is certified for Category III installations up to 600V, Pollution Degree 2 for indoor use, and Ingress Protection (IP)-54
Product Description
The AEMC 8220 single-phase multimeter (also known as a multitester) measures electrical parameters and distribution network parameters including voltage, current, power, and harmonics; and monitors parameters of operating machinery including temperature, inrush current and duration of operation, distance of windings, and rotational speed. It is designed for use by technicians, control and maintenance engineers, electrical contractors, and educators. A continuity test confirms a circuit conducts electricity, and a diode test detects correct functioning of a circuit's diodes. Measurements include kW, kVAR, PF, DPF, kWh, KVARh, kVAh, and VA. The meter displays crest factor, peak, K-factor, and minimum, maximum, and average volts and amps. It calculates and displays watts, VAR and VA, power factor (PF), and displacement power factor (DPF) for single-phase and balanced three-phase systems. The meter can store up to nine sets of reading totaling up to 99 snapshots for volts, amps, power, and harmonics. Data can be transferred to a computer using the optical USB port and the DataView software (included).
This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. The meter has auto- and manual-ranging modes. In auto-ranging mode the meter automatically selects the correct operating range for the property being measured. The three-line backlit color LCD has adjustable brightness and contrast for use in a variety of lighting levels. The meter meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply, Pollution Degree 2 for indoor use, and Ingress Protection certified IP54.
Specifications
| Sampling frequency | 256 samples/cycle |
| Voltage (TRMS) | Phase-to-Phase: 660V Phase-to-Neutral: 600V |
| Current (TRMS) | MN Clamp: 5mA to 6A/120 amp or 2 to 240 amp MR clamp: 10 to 1000 amp AC, 10 to 1,400 amp DC SR clamp: 3 to 1,200 amp MiniFlex: 10 to 1000 amp AmpFlex: 10 to 6500 amp |
| Frequency (Hz) | 40 to 70Hz |
| Harmonics | 1st to 50th |
| Other measurements | kW, kVAR, PF, DPF, kWh, KVARh, kVAh, VA, phase rotation, temperature, rpm, resistance |
| Data storage | Stores nine sets of readings up to 99 snapshots for volts, amps, power, and harmonics |
| Communication port | Optically isolated USB |
| Power supply | Six 1.5V AA alkaline batteries, included |
| Safety ratings | Ingress Protection IP54, International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 600V, and Pollution Degree 2 |
| Weight | 1.9lb./0.88kg |
| Dimensions | 8.3 x 4.3 x 2.4 inches/211 x 108 x 60mm (H x W x D) |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.
What's in the Box?
- AEMC 8220 digital multimeter
- Sensor or probe (if applicable)
- Instructions
Product Specifications
Specification for this product family
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut AEMC 8220 1-Phase Power Quality Analyzer with 5A/100A Current ProbeThе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 80% fоr реорlе whо buу AEMC 8220 1-Phase Power Quality Analyzer with 5A/100A Current Probe рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------
0 Response to "Hоttеѕt Sаlеѕ AEMC 8220 1-Phase Power Quality Analyzer with 5A/100A Current Probe"
Post a Comment